[TR] Oil pump re-assembly 4 cyl. TR motor

[TERRY SMITH]

Hi, Alan.  I didn't think so but couldn't remember for sure, so just did a quick check on the Moss Motors engine parts breakout.  The pump itself has a gasket, but the joint for the cap and the pump body does not. 

> On November 30, 2018 at 5:27 AM Alan & Lyn Dunscombe <dunscomb at chch.planet.org.nz> wrote:
> 
> 
>     I am about to disassemble my oil pump on 4 cyl. TR3 motor, & replace the oil pump  cap (with gauze filter) on to the bottom of the pump body.
> 
>      
> 
>     When I fit the new oil pump  cap to the pump body:
>     is there a gasket to go there? ( I don't think there is, but just checking)
>     do I use any sealer between the cap & body?
> 
>     what torque for the bolts holding it on?
> 
> 
>     Randall can you advise? anyone?
> 
>      
> 
>     thanks
> 
>     Alan Dunscombe  TS 3612
> 
> 
> 
> 


 

> ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net
> 


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181130/2a40613e/attachment.html>