[TR] BROKEN BOLTS CUT OFF DISC

[Robin Watson]

 I have used a Dremal cut off disc for many bolts while working on my 60
TR3A but sometimes you cannot get square to the bolt even using the small
disc, I have also found in my opinion the best tool made for this type of
body work is a 4 1/2" FLAP DISC in a 4 1/2" grinder much lighter pressure
needed than a grinding disc to do the job (which gives you better control)
than a grinding disc but be careful  it takes the metal off very quickly.
Robin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181115/bda243da/attachment.html>