[TR] SU needles bent?
wbeech
wbeech at flash.net
Wed Nov 14 16:38:13 MST 2018
Bud,
Yes, they should roll flat like a pool cue. The SU book lists an "ABT" standard needle for the Spitfire Mk.4 with the HS4 in 1974-76 or 77 depending on the carb, then an "ADN" for 1977-80. Interestingly they do not give an alternate needle to go richer or leaner. I found an older SU Tuning guide that lists the "CF" needle as the leaner step for an HS4.
Bill
-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Bud Rolofson
Sent: Wednesday, November 14, 2018 2:24 PM
To: Triumph list Team.net <triumphs at autox.team.net>
Subject: [TR] SU needles bent?
I’m working on some HS4 SU carbs and upon looking at the needles I rolled them on a flat surface much like you’d do a pool cue to see if it’s straight. They do not roll flat and look like they are bent. Shouldn’t they be perfectly straight?
Also the only stamping I could make out is a #3. I was expecting to see and AN or a DD stamp but these weren’t original to my Spitfire (came off a old mini cooper) so they could be both wrong and bent. Anyone know an appropriate leaner needle (for Denver) for Spitfire HS6 Su carbs?
Thanks
Bud
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
More information about the Triumphs
mailing list