[TR] Wiper Motor Mounts

[John Mitchell]

I used silicone grease on them. It still required patience, but it 
helped a lot.

On 11/6/2018 11:02 AM, David Friedlander wrote:
> Greetings all!
>
> I have rebuilt the wiper motor on my TR3 and refinished the paint
> on the motor mounting bracket. As you many know, the bracket has
> three holes in it, into which rubber mounts are installed. The Moss
> illustration of these three mounts is at
> https://mossmotors.com/mounting-kit?assoc=41630
>
> Has anyone installed this kit, replacing the old, corroded rubber
> mounts? I got my old ones out easily enough but can't seem to
> come up with a way to install the new ones. The diameter of the
> rubber mount bushings vs. the diameter of the three holes gotta
> make you wonder how they get installed..... I've even tried dunking
> the rubber bushings in boiling water but no success.
>
> Ideas? Thoughts?  Thanks!!
>
> Dave Friedlander
> '59 TR3A
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/jmitch@snet.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181106/d7abc034/attachment.html>