[TR] '3a carb piston getting stuck....
wbeech at flash.net
Sun May 27 22:23:45 MDT 2018
What did you use to polish the inside? Looks nice.
Sent from my Apple II+
On May 27, 2018, at 8:15 PM, David Templeton <davidt at opentext.com> wrote:
First off thanks as always for the advice, I got a number of suggestions and it seems a bit of elbow grease and emery paper was the recommended course of action. It was suggested to make sure of the contact point to use a blue indicator, well it is $9usd and $50cdn. So needed another solution. Reading other posts on different sites, it was suggested to use a fat sharpie to colour the metal then make it the parts rub. Then the contact point showed up. Well, after about 2hrs of sanding and checking I got it to slide cleanly. After carb cleaner and polishing of the piston and pot and voila finally reinstalled…. Those pistons go thunk now
** triumphs at autox.team.net **
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Triumphs