[TR] Brake problem
Q
HDRider570 at att.net
Fri Jun 29 14:48:30 MDT 2018
I have had similar problems over the years with both DOT4 and DOT5 fluid
on TR4's. It usually is a trapped air bubble.
I have started filling the system form the wheel cylinders forward buy
using an inexpensive (Harbor Freight) pump oil can with a length of
rubber hose on the end.and filling the system through the bleeder valves.
I start at the closest caliper and pump enough to fill just the brake
line to the main junction, repeat on the next caliper. On to the rear
wheel closest to the tee on the rear axle, just enough to get to the tee
and finally the farthermost wheel till the master reservoir is mostly
full. try the pedal and if all is well finish filling the master
cylinder from the top.
Edward Hamer
Petaluma Ca
More information about the Triumphs
mailing list