[TR] Oil Pressure Gauge Line

[Randall]

> While trying to fix more issues on the car I found that I broke the oil
> pressure gauge line right at the fitting in the engine block. Does anyone
> know if I can repair the line. Is there a way to remove the broken piece
> of line off the fitting and securely installing the line back on the
> fitting?

I haven't tried it, but what I would do is to drill out the broken stub, tin
the end of the steel line, then sweat solder it back together.

Or just buy a new one.  Only about $30 @ TRF, and it would suck to have that
joint come apart and dump all the oil on the ground.

-- Randall