[TR] Rear Hub Bearing Replacement
fishplate at gmail.com
Thu Jan 18 08:55:13 MST 2018
On Wed, Jan 17, 2018 at 10:23 PM, Darrell Walker <darrellw360 at mac.com> wrote:
> Goodparts also has replacement hubs that work with the original half shafts:
That's what I did on my car. Took the splined axles apart and checked
for wear...everything looked good so I greased them well with
synthetic lubricant and reassembled them. I no longer get the "hop"
under hard acceleration in a curve, where the splines have grabbed and
release when I change gears. I kind of miss that quirk, but then I'm
I also used the kit from Patton Machine to redrill the stud holes in
the trailing arm for inserts. http://www.pattonmachine.com/TAK.htm
I'm not sure if it was necessary, but I won't have to do anything in
Corrosion Acres, Ga.
More information about the Triumphs