[TR] TR3 Turn Signal woes

[CFM-TR]

See attached diagram.

 

When I operate left turn on control head, front and rear operate as they
should.

When I operate right turn on control, right front works but both lamps flash
in the rear.

 

Any ideas where the problem is?  I am at a complete loss.  I would think
that if I have right/left crossover, both lamps in the rear would flash
regardless of which indicator is used.  I checked connections at the rear
lamps and only a single line (correct one GR or GW) is connected.  Only line
going to right front is GW.  I have tried different connections at left
front since the GN and GR look so similar but nothing works then.  I checked
all four corners and live/ground wires are going to the correct terminals.

 

Any ideas appreciated.  Thanks

 

Carl Musson

1960 Triumph TR3

TS81802LO

Tampa, FL

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180108/b9cf69e7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TR3A wiring Turn Signals.jpg
Type: image/jpeg
Size: 1137509 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180108/b9cf69e7/attachment.jpg>