[TR] TR3A Control Head...

Wed Dec 26 23:37:44 MST 2018

Joel,
You should find three small grub screws that are on the back of the steering wheel hub.  These pinch the metal plate that is part of the control head.  Just align the head and tighten the screws down. 
Bill

Sent from my Motorola 8000X

On Dec 26, 2018, at 11:30 PM, Joel E. Justin <j_bar_j at hotmail.com> wrote:

I’m rebuilding a TR3A and the control head (horn and turn signal) turns with the steering wheel. How do you lock it in place so the turn signal lever is always straight up?

Joel…

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181227/c58c0228/attachment.html>