[TR] [EXTERNAL] - RE: red light, huh?

David Templeton davidt at opentext.com
Tue Aug 21 16:53:06 MDT 2018


Or the control box?  Since that is the only thing to have changed…..

From: auprichard at uprichard.net <auprichard at uprichard.net>
Sent: Tuesday, August 21, 2018 5:16 PM
To: David Templeton <davidt at opentext.com>; 'Triumphs List' <triumphs at autox.team.net>
Subject: RE: [EXTERNAL] - RE: [TR] red light, huh?

I just saw something I missed:  if the ignition light is on with the ignition off, you have wired something wrong.  With the ignition off, the live wire is the brown-blue which runs to the ignition switch - all the white wires should be dead.  Check your wiring and the switch itself.

Andew

--------- Original Message ---------
Subject: RE: [EXTERNAL] - RE: [TR] red light, huh?
From: "David Templeton" <davidt at opentext.com<mailto:davidt at opentext.com>>
Date: 8/21/18 1:32 pm
To: "auprichard at uprichard.net<mailto:auprichard at uprichard.net>" <auprichard at uprichard.net<mailto:auprichard at uprichard.net>>, "'Triumphs List'" <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>


From: auprichard at uprichard.net<mailto:auprichard at uprichard.net> <auprichard at uprichard.net<mailto:auprichard at uprichard.net>>
Sent: Tuesday, August 21, 2018 2:14 PM
To: David Templeton <davidt at opentext.com<mailto:davidt at opentext.com>>; 'Triumphs List' <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>
Subject: [EXTERNAL] - RE: [TR] red light, huh?

1. Red light on - common problem with a rebuild.  It is probably your voltage regulator, but could be the generator.
[DT] ok, I have an alternator with a dummy control box…
https://scontent.fyto1-1.fna.fbcdn.net/v/t31.0-8/22289710_10154791827276960_7862641928967427382_o.jpg?_nc_fx=fyto1-1&_nc_cat=0&oh=037cf08c7b1bd39368e193977202444f&oe=5C00F9F4<https://urldefense.proofpoint.com/v2/url?u=https-3A__scontent.fyto1-2D1.fna.fbcdn.net_v_t31.0-2D8_22289710-5F10154791827276960-5F7862641928967427382-5Fo.jpg-3F-5Fnc-5Ffx-3Dfyto1-2D1-26-5Fnc-5Fcat-3D0-26oh-3D037cf08c7b1bd39368e193977202444f-26oe-3D5C00F9F4&d=DwMFaQ&c=ZgVRmm3mf2P1-XDAyDsu4A&r=346MKQty4J9yevdUa9Fj_cT53y_74TwSRM-I7J2SFzs&m=Rua756CQynMvOtKWss-ei8GerYpgfKheO5Y3yZFNm6E&s=5Z47mQt16DkC7BEW6yxi_ZGC3enQcV4eld15EtHIrN0&e=>

But with the ignition switch set to off????  I would expect no power to be flowing in the system?!?!?!?

2. Your amp gauge should be +ve when running, but then your charging function isn't set up (red light on).  Fix the charging system, then address the ammeter.  If it is still -ve, the wires are probably reversed.
[DT] yeap reversed, I do need to do that, looks like tonight’s job.    The question was more about the scale of the needle deviation, it was only slight, not a large value

3. Best case scenario for the grinding clutch is adjustment at the pedal and the slave:  worse case - you don't have a clutch and need to pull the gearbox
[DT] hmmm, ok, going to assume adjustment and maybe master/slave rebuild….

4. My rule of thumb is 60psi at 3000 rpm when warm, so higher with a cold engine.
[DT] ok she is idling and was almost 180deg.  Sooo good??? 😊

Andrew Uprichard
Jackson, Michigan

--------- Original Message ---------
Subject: [TR] red light, huh?
From: "David Templeton" <davidt at opentext.com<mailto:davidt at opentext.com>>
Date: 8/20/18 8:59 pm
To: "'Triumphs List'" <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>
Ok now the euphoria of the engine starting has passed ( well not really, this is going to last a while ).  Need to tackle a few more things:


  *   Hook up the battery and while the ignition is off the red dash light is on all the time????
  *   I do need to switch over the amp gauge.  While running, it is slightly -ve ( which means slightly +ve ).  This a good sign? Or should there be more charging?
  *   While the engine was running, push in the clutch, the pedal moves, but gears grinds touching to go into gear.  I am assuming the slave is not responding?  There is fluif in the can 😊  ( still love that word )
  *   The oil pressure running on this ‘break-in’ oil is a solid 60psi.  Does this collective like that?

David
** triumphs at autox.team.net<mailto:triumphs at autox.team.net> ** Donate: http://www.team.net/donate.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_donate.html&d=DwMFaQ&c=ZgVRmm3mf2P1-XDAyDsu4A&r=346MKQty4J9yevdUa9Fj_cT53y_74TwSRM-I7J2SFzs&m=Rua756CQynMvOtKWss-ei8GerYpgfKheO5Y3yZFNm6E&s=cnr8jWmcCsKYO-VwPxlbioE7t_UqrbXNk2CyHRB6318&e=> Archive: http://www.team.net/archive<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_archive&d=DwMFaQ&c=ZgVRmm3mf2P1-XDAyDsu4A&r=346MKQty4J9yevdUa9Fj_cT53y_74TwSRM-I7J2SFzs&m=Rua756CQynMvOtKWss-ei8GerYpgfKheO5Y3yZFNm6E&s=UX8-UHHCAvYCFMzUCjsDWiN2W0Fp8YQurMp3wWzk1Gs&e=> Forums: http://www.team.net/forums<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.team.net_forums&d=DwMFaQ&c=ZgVRmm3mf2P1-XDAyDsu4A&r=346MKQty4J9yevdUa9Fj_cT53y_74TwSRM-I7J2SFzs&m=Rua756CQynMvOtKWss-ei8GerYpgfKheO5Y3yZFNm6E&s=YlQYemd_wAwGhdwFFIES_d3gz2ULwiTM-TxtMIHSYe4&e=> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net<https://urldefense.proofpoint.com/v2/url?u=http-3A__autox.team.net_mailman_options_triumphs_auprichard-40uprichard.net&d=DwMFaQ&c=ZgVRmm3mf2P1-XDAyDsu4A&r=346MKQty4J9yevdUa9Fj_cT53y_74TwSRM-I7J2SFzs&m=Rua756CQynMvOtKWss-ei8GerYpgfKheO5Y3yZFNm6E&s=2tGMwiY4kg0FQAXNFECq6rLAD1qZM0cmQm_UcxDnUTE&e=>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180821/c0be216f/attachment.html>


More information about the Triumphs mailing list