[TR] torque wrench question
Wbeech@flash.net
wbeech at flash.net
Fri Aug 10 12:24:53 MDT 2018
Good question, I always used the same values. Maybe that was the right thing to do but I am no engineer.
Bill B
Sent from my Handspring Treo
On Aug 10, 2018, at 11:17 AM, Sujit Roy <triumphstag at gmail.com> wrote:
Due to tight space, I can't put a socket on the end of a torque wrench, but I can put a small Craftsman crow foot on the end.
If I do this, by what factor should I add or remove from the specified torque for a bolt?
I'm working on a Triumph gearbox with OD.
Sujit
--
Sujit Roy
Cupertino, California
https://triumphstagblog.wordpress.com/
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180810/a625a1ad/attachment.html>
More information about the Triumphs
mailing list