[TR] Timing Chain Cover Oil Seal

[Erkan Hassan]

Hmmm...sounds about right

Will try to remove the steel ring...don’t want to break anything 

Does the steel ring go back on with the new seal or just the plastic piece??

Thanks
Erkan

Sent from my iPhone

On Aug 7, 2018, at 4:17 PM, Randall <tr3driver at ca.rr.com> wrote:

>> I dug out the old oil seal from the cover.  Crumbled pieces 
>> came out and scraped as much as I could out of there (old 
>> spring came out also)
>> 
> 
>> The seal has a diameter of about 2.5 inches and is not 
>> flexible but the inner diameter of the opening is about 2 inches.
> 
> My guess is that you haven't removed all of the old seal.  It should have an
> outer ring, which is probably steel and might look like part of the cover.
> 
> -- Randall  
>