[TR] D Type Overdrive

[Paul Tegler]

Blue Hylomar
Since you have that inner lip  (which should be a snug fit)  it doesn't 
take much to get it to seal up

worst case...a very thin bead of high temp rtv..VERY sparingly .

worst experience.. a guy dinged up the surfaces with a screw driver 
prying the ring out,
notebook paper to make super thin gasket, covered in the obligatory 
ultra thin layer of Hylomar has lasted 10+ years

Paul Tegler ptegler at verizon.net www.teglerizer.com

On 9/13/2017 7:12 PM, Joe Curry wrote:
>
> *I am undertaking the refurbishment of a D-Type overdrive unit and I 
> see that there is no gasket between the brake ring and the halves of 
> the case assembly.  The Haynes manual specifies using “jointing 
> compound” on the mating surfaces. What is the recommended stuff that 
> is available today for this purpose?*
>
> **
>
> *Thanks,*
>
> *Joe C.*
>
> **
>
> /*/Sent from my HAL-9000/*/
>
> **
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170913/02e40a56/attachment.html>