[TR] Pilot bush TR3A

[Andrew Uprichard]

I went through this yesterday, having had an awful time removing the old one
a few weeks ago.  Tried pumping grease to force it out but ended up tapping
a thread in it and then screwing a bolt through it until it hit the end and
the bush slowly came out.

I very gently honed the opening  as it was pretty cruddy and then gently
sanded the new bush until I was able to slide it in and remove it .

Andrew Uprichard
Jackson, Michigan

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of James
Henningsen
Sent: Saturday, November 25, 2017 9:35 AM
To: triumphs at autox.team.net
Subject: [TR] Pilot bush TR3A

My new pilot bush for crank does not fit in easily.  I remember doing this
in my TR6 motor and no issues.  Is there a technique to use to get bush in
without damaging opening or bush?  
Thanks 
Jim Henningsen
Ocala FL. 

Sent from my iPhone

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net