[TR] adding wire wheels

[Jerry Van Vlack]

You also need the double bevel lug nuts. Bolt up the adapter and cut studs with a few threads showing or bolt up the adapters and measure the amount of stud still protruding and get a spacer of that thickness. I “think” 1/4 inch thick spacer is sufficient but a measurement is in order.
JVV

From: dave 
Sent: Sunday, November 12, 2017 1:10 PM
To: triumphs at autox.team.net 
Subject: [TR] adding wire wheels

We have an early TR4 (CT9683) and just purchased a set of wire wheels for it.

 

>From what I understand, you need to cut the lugs off slightly when you bolt the adapters on?  Can I use spacers to avoid this?  And anyone know how much?



--------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171112/e42878b2/attachment.html>