[TR] flywheel bolts to reuse or renew
CFMTR3A
cfmtr3a at verizon.net
Wed Nov 1 18:02:40 MDT 2017
For something integral and internal as the flywheel I would opt for new.
Have you checked other sources as that does seem to be a bit steep. McMasters-Carr or Fastenal might be options.
On Wed, Nov 1, 2017 at 7:55 PM -0400, "Sujit Roy" <triumphstag at gmail.com> wrote:
Have been told to get new flywheel bolts when replacing the flywheel . Can I use the same bolts and use locktite. This is for a Stag
Each bolt is about 10 UK pounds. Ouch.
Sujit
--
Sujit Roy
Cupertino, California
https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171102/a585b42d/attachment.html>
More information about the Triumphs
mailing list