[TR] clutch fork pin

[Cliff Hansen]

Do you mean the pins on the fork which hold the throwout bearing? Or the single pin which holds the fork to the shaft? If it's the latter (single pin) it's threaded, you don't need a press.

Get Outlook for iOS<https://aka.ms/o0ukef>

________________________________
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of Sujit Roy <triumphstag at gmail.com>
Sent: Monday, March 27, 2017 1:46:29 PM
To: Triumphs
Subject: [TR] clutch fork pin

I see some vendors selling clutch fork pins for about $2.
Do you need 20 tonne press to make sure they stay in or should I buy a new fork?

There is some slight wear on my fork's pins. Can I reuse the fork or should I just buy a new complete fork?

Sujit

--
Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170327/40355d36/attachment.html>