[TR] TR4 Brake Light Switch

[Frank Fisher]

i hear you.as i said my 2 buddies are running dot 5 in their TR3's and maybe one other guy close by.
but for some reason mine just keep dying.they die a sloooow death.at first they dont come on with a light touch and then slowly it takes more and more pressure to get the lights to come on, until finally they stop working.
some one posted a link to a supplier who specifically states they are dot 5 compatible and i thought i kept the name, but now cant find it.and the list cant help. already asked.
but i can now change one out in less than 5 minutes once i get the attention of the wife.
im just living with it.i do not want to run ugly wires to a manual switch in the cockpit. 

      From: Bob Labuz <yellowtr at adelphia.net>
 To: Frank Fisher <yellowtr3 at yahoo.com>; Rye Livingston <ryel at mac.com> 
Cc: "triumphs at autox.team.net" <triumphs at autox.team.net>; John Finlayson <john_finlayson at telus.net>
 Sent: Wednesday, June 7, 2017 9:05 AM
 Subject: Re: [TR] TR4 Brake Light Switch
   
 Frank,
 
 I have been using DOT5 from the TRF in my 63 TR4 ever since its rebuild over 12 years ago. No problems what so ever. Also using DOT5 on my 72 TR6. But still using DOT4 on my 58 3. All have original components, just rebuilt with new seals. Sans the brake light switch on the 3 and 4. All I remember is blowing them out with alcohol before refit.
 
 Bob
 
 On 06/07/2017 11:37 AM, Frank Fisher wrote:
  
  yes. i think its a dot 5 thing going on. funny that my 2 friends with TR3's also changed to dot 5 during the builds about 5/8 years ago and they are having no problems. but me .....!!!!!!!!!! 
  so here is my change out procedure. have her indoors sit in the driver seat. you crack the switch with a wrench then when you say NOW she pushes down on the brake pedal ever so slooooooooowly you can get the old off and new one on before she hits bottom and that allows me to not have to re-bleed the brakes. 
  
 
        From: Rye Livingston <ryel at mac.com>
 To: Frank Fisher <yellowtr3 at yahoo.com> 
 Cc: John Finlayson <john_finlayson at telus.net>; "triumphs at autox.team.net" <triumphs at autox.team.net>
 Sent: Tuesday, June 6, 2017 5:22 PM
 Subject: Re: [TR] TR4 Brake Light Switch
  
   Why are you changing it? The switch is failing? 
  Rye 
  
   
 On Jun 06, 2017, at 03:27 PM, Frank Fisher <yellowtr3 at yahoo.com> wrote:
 
   
   i dont use thread sealer on mine (tr3). and im changing it about every 8 months 
  Frank 
 
      From: John Finlayson <john_finlayson at telus.net>
 To: triumphs at autox.team.net 
 Cc: john_finlayson at telus.net
 Sent: Tuesday, June 6, 2017 12:54 PM
 Subject: [TR] TR4 Brake Light Switch
  
 I recently discovered that the brake lights are not working on  my '62 TR4 and have traced it to the pressure switch. The switch has 1/8 x 27 NPTF pipe threads. Does anyone know if a thread sealant is required and if so what would be the appropriate one to use?
  
  John Finlayson 
  
  
       
          
 
 

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170607/e0b1d727/attachment.html>