[TR] Fwd: TR4 Brake Light Switch

[Chad]

I had a similar setup on a Sports 6 I had years back.  I just removed it, put in a plug, and mounted a TR6 style switch on the brake pedal.  I just fabbed up a simple bracket to mount it.

On Tuesday, June 6, 2017, 4:21:25 PM CDT, John Finlayson <john_finlayson at telus.net> wrote:



----- Forwarded Message -----
From: "John Finlayson" <john_finlayson at telus.net>
To: triumphs at autox.team.net
Cc: "john finlayson" <john_finlayson at telus.net>
Sent: Tuesday, June 6, 2017 12:00:27 PM
Subject: TR4 Brake Light Switch

I recently discovered that the brake lights are not working on my '62 TR4 and have traced it to the pressure switch. The switch has 1/8 x 27 NPTF pipe threads. Does anyone know if a thread sealant is required and if so what would be the appropriate one to use?

John Finlayson

I should note that the TR2 workshop manual does not mention sealant..."Screw stop light switch into head of banjo bolt...". The setup is somewhat different in my TR4 but I think the switch is essentially the same. The new switch I will be installing is from Moss 542-110.  

John Finlayson 

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/triumph74tr6@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170606/08905537/attachment.html>