[TR] Another over drive concern

Dave dave1massey at cs.com
Wed Jul 26 05:59:04 MDT 2017


Also check the adjustment of the OD lock-out switches.  I had this issue once and had to remove a shim.

 

 

Dave Massey


 

 

-----Original Message-----
From: TERRY SMITH <terryrs at comcast.net>
To: ron landis <rdltr250 at sbcglobal.net>; Bud Rolofson <levilevi at comcast.net>
Cc: triumphs <triumphs at autox.team.net>
Sent: Tue, Jul 25, 2017 6:13 pm
Subject: Re: [TR] Another over drive concern


I did a voltage check of the power to the OD switch.  It was full on.  Solenoid kicked in.  But intermittently, in 3rd and 4th gear, the solenoid "chattered" between engage and no engage.  I have a short somewhere.  Will try the relay when it comes in.  After that, will rewire and re-solder all connections, replacing the modern two prong fuse unit with a standard glass fuse unit, in case the broken wire is in there somewhere.  Stay tuned!
Terry Smith, '59 TR3A
New Hampshire.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170726/1d759439/attachment.html>


More information about the Triumphs mailing list