[TR] Wishbone bushes

[David Porter]

I use a fair amount of brute strength, liberally soak with a rust buster 
and then using the chisel fixture on a pneumatic hammer bully them off. 
Usually about a minute each. They need to be replaced anyway.. DaveP



On 7/11/2017 9:51 PM, Randall wrote:
>> I am trying to rebuild my TR3 front suspension and find that, on the
>> passenger side,
>> the old. steel, inner wishbone bushes (Moss P/N 661-570) don't want to
>> come off.
> What I did was to use a Dremel moto-tool and abrasive cutoff blade to cut
> along the length of the bush, most of the way through.  Then use a cold
> chisel and BFH to break the cut open.  Once it's open, the bush should slide
> off easily.
>
> -- Randall
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com
>
>

-- 
Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM 
87107 505-352-1378 Go HERE: my world www.porterbikes.com/