[TR] How to removed clutch fork when tapered pin broke

[Sujit Roy]

I used Randall's approach and drilled a hole through the fork as suggested.
I have saved the shaft. Here are some photos. The fork is warn.

https://goo.gl/photos/XnGSZRFaFRRWxJjm9

Sujit

Thanks

On Mon, Jan 9, 2017 at 10:52 AM, Bob Labuz <yellowtr at adelphia.net> wrote:

> You can drill enough of the remaining pin but be sure not to damage the
> threads on the fork. Just drill enough so the shaft will pull out from the
> fork.
>
> Once the fork is out you can drill out the remaining portion of the pin or
> use an easy out by drilling a smaller hole. Should come right out.
>
> Add a grade 8 bolt with a nylock nut through the fork and shaft. I believe
> a 1/4" bolt will work.
>
> I think Randall will have better advice on how to do the additional hole
> in the fork and shaft.
>
> Bob
>
>
> On 01/09/2017 12:28 PM, Sujit Roy wrote:
>
> I'm trying to remove a clutch fork from a Stags' box.   (Now I see why
> there are so many new available forks available)
>
> The tapered pin broke in the shaft.   Do I cut the fork off or the shaft?
>
> I am able to see the pin through the inside of the.  Would it be possible
> to drill and extract?
>
> Sujit
>
> --
> Sujit Roy
> Cupertino, CA
> (408) 839-8359
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr@adelphia.net
>
>
>


-- 
Sujit Roy, Realtor
Cupertino, CA
(408) 839-8359
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170120/bcd90d7e/attachment.html>