[TR] TR shifter spring and plunger

[Carl Sereda]

Hi Sujit,



 You might want to get a brand new spring and/or plunger.. since TR stick shifters seem prone to rattle. 
TRF's spring is slightly huskier than Moss's, but both have machined flat ends, and a precise short length. Moss's plunger provided a slightly snugger fit for my old bore.
Grease holds these precision parts in place for reassembly but the wire tie a good idea.

Good luck with it,
Carl
'63 TR4 since '74



I have one gear lever with it missing and another with what appears to be
the plunger and no spring.

The plunger is in the lever so I don't know what it looks like.

Can I use a spring from a ball pen and cut it down to size. Does only the
grease in it stop it falling out during assembly into top cover?



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170206/1bed3b3c/attachment.html>