[TR] PDA valve

alan salvatore alansalvy at gmail.com
Thu Feb 2 09:59:15 MST 2017


Hi Bud,
I have 180 of those. Ordered a bag and then couldn't find when needed so
ordered another bag.
This Pda takes a different size.

Al

On Feb 2, 2017 11:34 AM, "Bud R" <levilevi at comcast.net> wrote:

> The o-ring needed is a size 2-008, the material is EPDM/EPM/EPR. Which is
> ethylene propylene for use with brake fluids.
>
> If anyone on the list needs some to rebuild their PDWA send me your
> mailing address.
>
> But hurry because out of the bag of 100 I had to buy I only have about 92
> of them left. :)
>
>
> Bud Rolofson
>
> Extreme Parts Racing (more than just a haircut)
>
> 71TR6 CC57365 (Good 6)
> 71 Spitfire MK IV Race Car #3
> 69 Spitfire MK III (back up FE engine/dinghy car)
> 93 Minnie Winnie Race Support Vehicle
> 77 Z-50A Hardly Davidson Honda Mini-Trail Bike (Triumph Pit Bike)
>
> On Feb 2, 2017, at 8:51 AM, Bud Rolofson <levilevi at comcast.net> wrote:
>
> > You can get one (or more) from me. I have some and will send you a few
> if you give me an address.
> >
> > Bud
> >
> > Sent from my Commodore 64
> >
> >> On Feb 2, 2017, at 7:02 AM, alan salvatore <alansalvy at gmail.com> wrote:
> >>
> >> I have fixed a lot of PDA valves and have 50 O-rings from Macmasters.
> >> I took one off a 68 TR250 and it needs a different type of O-ring,
> looks more like a miniature throttle shaft seal.
> >> Where does one get these?
> >>
> >> Thanks
> >>
> >> Al Salvatore
> >>
> >> ** triumphs at autox.team.net **
> >>
> >> Donate: http://www.team.net/donate.html
> >> Archive: http://www.team.net/archive
> >> Forums: http://www.team.net/forums
> >> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/triumphs/levilevi at comcast.net
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170202/2249c299/attachment.html>


More information about the Triumphs mailing list