[TR] Car jack for Triumph Cars

dave dave at ranteer.com
Wed Aug 30 10:07:57 MDT 2017


+1

 

From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Keith Stewart
Sent: Wednesday, August 30, 2017 7:49 AM
To: 'Stuart Greenwood' <sagreenwood at att.net>; triumphs at autox.team.net
Subject: Re: [TR] Car jack for Triumph Cars

 

 

 

On August 28, 2017 4:44 PM Stuart Greenwood wrote

 

The left and right  main frame members  of the TR and Spitfire cars are close together and this issue, I think, renders all the lifts like Bendipack quick lift and Ezcarlift not suitable. With these lifts you have to lift on the out riggers which are welded to the main frame members and hence not the strongest part of the frame. 

+++++

I am guessing you are just stating an opinion here rather than relating an experience. My Ezcarlift fully supports the car on the main frame rails of my TR4, just behind the front wheels and just in front of the rear wheels. While I have not used it yet on the TR6, I know Bob Danielson reports his TR6 is supported just fine. This is not intended to refute the use of the products you cite, but to counter the negative statement about the Ezcarlift.

 

Keith Stewart

keithstewart at bell.net <mailto:keithstewart at bell.net> 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170830/ed1ffa61/attachment.html>


More information about the Triumphs mailing list