[TR] Electronic Flasher Question

[Dave]

Have you tried swapping the wires on the flasher?

 

 

Dave Massey


 

 

-----Original Message-----
From: Tom Walling <pdqtr6 at comcast.net>
To: NET Member Mailing <net at newenglandtriumphs.org>; Triumphs <triumphs at autox.team.net>
Sent: Thu, Aug 10, 2017 11:02 am
Subject: [TR] Electronic Flasher Question



I am finishing up the conversion from incandescent lighting to LED on my TR6, and have one more mystery to solve. The turn signals don't flash. They come on when I use the lever, but they don't blink. I replaced the flasher unit with Moss p/n 141-667 (2 prong unit). The flasher came with no instructions about which wire goes to which prong, but the unit doesn't work either way I plug it in. Any advice? Is there a test of some sort I could perform to see if the unit is faulty or ok? 

 

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170810/229794a4/attachment.html>