[TR] Overdrive Update

Randall TR3driver at ca.rr.com
Sun Aug 6 19:44:53 MDT 2017

Too late this time, but if it happens again, you might want to consider a
simple mod.  I made a custom nut and used a socket head screw, so that it
was easy to get it tight enough and also allow adjustment without removing
the tunnel.
Not shown is the short pin I cut to put in the adjustment lever with needle
nose pliers.
-- Randall

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170806/6db6a7bc/attachment.html>

More information about the Triumphs mailing list