[TR] where to mount a fuel pump on a TR3?
ryel at mac.com
Wed Aug 2 22:31:59 MDT 2017
My local British repair shop recommended a German pump. Hardi pump. https://www.hardi-automotive.com/en/products/pumps-1224v/
The model I bought is the right PSI, I think 3 lbs is what a TR3 with SUs needs, and you can mount it anywhere. Back by the tank, engine compartment, etc. And it's very quiet.
On Aug 02, 2017, at 09:04 PM, Hoyt Duff <hoytduff at gmail.com> wrote:
Electric fuel pumps should be mounted below the level of the tank so
that gravity helps things along.
There are pumps that can be retro-fitted to be in-tank. That helps
with the noise and cools the pump, just like modern cars.
While that one is a high pressure pump better suited to fuel
injection, there are lower pressure pumps suited to carburetors (or
pumps used with pressure regulators and return lines).
I can speak from experience that externally mounted electric pumps are noisy.
On 8/2/17, TeriAnn J. Wakeman <tjwakeman at gmail.com> wrote:
For those of you who have mounted an electric fuel pump on a TR3A, where
have you physically located the pump? I don't see a good location for one.
Book - The Essential Guide to Overland Travel in the United States and
2 years to write and 38 years of travel and camping to learn what to write
*Because the world beckons and life waits for no one*
** triumphs at autox.team.net **
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Triumphs