[TR] TR6 Front Suspension

[Harrymague at aol.com]

Yes and No.  Can't figure this out.  With the negative camber  sure makes 
the turning very responsive.
Harry
 
 
In a message dated 4/5/2017 4:40:01 P.M. Eastern Daylight Time,  
stan at redtr6.com writes:

 
Do you have the upper fulcrum pin in the correct  orientation and do you 
have any shims on the lower arm mounts ? 
Stan 
 
 
From: Triumphs  [mailto:triumphs-bounces at autox.team.net] On Behalf Of  
Harrymague at aol.com
Sent: Wednesday, April 5, 2017 12:24  AM
To: triumphs at autox.team.net
Subject: [TR] TR6 Front  Suspension

 
How do  you take out negative camber in the front suspension??  After 
rebuilding  my car on a new Ratco frame, I took my car to have the four wheel 
alignment  done.  On the machine the front wheel camber  was
 
minus  3.0 on both wheels.  Is there any way to take some of that out.  The 
 only different between this frame suspension and the old are new ball 
joints  and new springs.  Any body have any  thoughts??
 
Thanks
 
Harry  Mague




** triumphs at autox.team.net  **

Donate: http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe/Manage:  
http://autox.team.net/mailman/options/triumphs/harrymague@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170405/fefdc558/attachment.html>