[TR] High Torque Starters

[Geo Hahn]

What sort of lock washers were used?

For connections with a reputation of coming loose I use Nord-Locks (or a
generic knock-off of same).  In one particularly difficult-to-hold location
a combination of Nord-Locks and socket cap screws worked very well.

Geo

On Sat, Sep 3, 2016 at 12:48 PM, Dean Tetterton <tr3a58 at verizon.net> wrote:

> List
>         Over the past 6 month's I have had 3 different Triumph's to have
> the 2 allen head bolts that hold the Adapter block to the starter motor to
> come loose. The first was a friends TR3 starter and then the starter on my
> TR4 race car and yesterday the starter on my street TR4. These are Allen
> head metric bolts about 2 inches long. Is there an epidemic going around my
> area? Put these back in with red loctite. Hope that does it. Getting fast
> at taking starters out. Check and see if your's are loose before they fall
> out.
>
> Dean T.
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/triumphs/ahwahneetr at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160903/dcf5d00b/attachment.html>