[TR] tool id
dave n
dave at ranteer.com
Sat Oct 8 22:14:27 MDT 2016
I had one with a previous car, and it worked great! I am sorry you have had a bad experience. I thought it was a great tool, and prevented damage to the knock offs. thank you for the link.
From: Geo Hahn
Sent: Saturday, October 8, 2016 5:55 PM
To: dave n ; Triumphs
Subject: Re: [TR] tool id
Dave -
It is Moss p/n 386-165 and, in my opinion, a waste of money. I have witnessed many of these fail in normal use.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=31760&SortOrder=10
I have a purpose-made aluminum socket for the wires on my other (52mm knock-offs) car as it can be troublesome, but never had to get any tool for the TRs.
For any wires it is hard to beat (pun intended) a big lead hammer.
I use a 6 lb hammer from Zoro tools -- I don't so much swing it as raise it up and aim as it comes back down.
https://www.zoro.com/american-hammer-sledge-hammer-6-lb-12-in-aluminum-am6lnag/i/G5312264/
Doesn't take very many licks with that bad boy to get the nut loose.
Geo
On Sat, Oct 8, 2016 at 1:31 PM, dave n <dave at ranteer.com> wrote:
I am looking for the laminated wood eared knockoff removing tool.
I’m searching through moss and tried several searches but am coming up short.
anyone have this tool number?
thanks!
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20161008/4df0e56f/attachment.html>
More information about the Triumphs
mailing list