[TR] tool id

Geo Hahn ahwahneetr at gmail.com
Sat Oct 8 16:55:18 MDT 2016


Dave -

It is Moss p/n 386-165 and, in my opinion, a waste of money.  I have
witnessed many of these fail in normal use.

http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=31760&SortOrder=10

I have a purpose-made aluminum socket for the wires on my other (52mm
knock-offs) car as it can be troublesome, but never had to get any tool for
the TRs.

For any wires it is hard to beat (pun intended) a big lead hammer.

I use a 6 lb hammer from Zoro tools -- I don't so much swing it as raise it
up and aim as it comes back down.

https://www.zoro.com/american-hammer-sledge-hammer-6-lb-12-in-aluminum-am6lnag/i/G5312264/

Doesn't take very many licks with that bad boy to get the nut loose.

Geo

On Sat, Oct 8, 2016 at 1:31 PM, dave n <dave at ranteer.com> wrote:

> I am looking for the laminated wood eared knockoff removing tool.
>
> I’m searching through moss and tried several searches but am coming up
> short.
>
> anyone have this tool number?
>
> thanks!
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/triumphs/ahwahneetr at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20161008/5f2a6573/attachment.html>


More information about the Triumphs mailing list