[TR] TR6 Stromberg question
Pete Arakelian
arakelianp at mossmotors.com
Wed Mar 9 12:34:47 MST 2016
< I adjusted the new float to fully cl ose the valve when the mold line of the float was parallel with the horizontal edge of the carb where the fuel reservoir attaches.
What? The correct float adjustment is 16-17mm between the gasket face on the carb body to the highest point of each float with the carb inverted.
Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160309/b48e9e34/attachment.html>
More information about the Triumphs
mailing list