[TR] TR6 oil pan gasket

[Dave]

 You may get five responses with five different opinions but here's mine:

I would use Felpro Form-A-Gasket #2 (or eq) to affix the gasket to the pan and Hylomar between the gasket and the block.

It's been a bunch of years since I tried this but I think the pan can come off in-situ if the motor mounts have not sagged too much.


Dave Massey


 

 

-----Original Message-----
From: Bob Peglow <rpeglow at optonline.net>
To: triumphs <triumphs at autox.team.net>
Sent: Wed, Apr 27, 2016 12:14 pm
Subject: [TR] TR6 oil pan gasket


Hello List,
I want to change oil pan gasket on my TR6.
Any treatment to gasket before installation recommended?
Can it be done with car on jack stands?
Thank you.
Regards,
Bob



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160427/f33c232f/attachment.html>