[TR] TR6 Spring Packing - 2 or 3 Per?

[Chad]

I have never used a packing between the spacer and spring. Chad in Tulsa
       From: D&BLambert <dblambert at cox.net>
 To: 'Triumph' <triumphs at autox.team.net> 
 Sent: Saturday, September 19, 2015 11:29 AM
 Subject: [TR] TR6 Spring Packing - 2 or 3 Per?
   
Hello,
I am replacing the springs, front and rear, on my TR6 and will be using one
aluminum spacer with each spring.  Do I need to put a packing piece between
the spring and the spacer?  It appears that the spacer is machined with room
to do so.  In other words, do I need two packing pieces per corner or three?
I'm using the urethane packing pieces, but that should be immaterial to my
question I would think.
Thanks, Dennis


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/triumph74tr6@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150921/2109823e/attachment.html>