[TR] TR3A Grab Handle Screws

Frank Fisher yellowtr3 at yahoo.com
Thu Oct 22 12:34:08 MDT 2015


as i recall my speedy nuts clipped into my capping and not my dash proper.
Frank

      From: CFMTR3A <cfmtr3a at verizon.net>
 To: 'Randall' <TR3driver at ca.rr.com>; 'list Triumph' <triumphs at autox.team.net> 
 Sent: Thursday, October 22, 2015 10:13 AM
 Subject: Re: [TR] TR3A Grab Handle Screws
   
I still don't see how the fixed nut would fit.  There are two holes on each
side of the grab handle.  One would be further away from the edge than a
fixed nut would reach plus the one closer to the edge would be blocking
access.    

I am getting ready for a local show this Saturday and I think this is going
to have to wait until afterwards as I think I'll have to take the capping
off to see what is underneath.  

I typed all that and decided to do a search.  Found the attached.  Will get
some #10 pointed screws and see if they work.    

Carl 
1960 Triumph TR3
TS81802LO
Tampa, FL





-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of CFMTR3A
Sent: Thursday, October 22, 2015 9:10 AM
To: 'Randall' <TR3driver at ca.rr.com>; 'list Triumph'
<triumphs at autox.team.net>
Subject: Re: [TR] TR3A Grab Handle Screws

Argh,,,,  guess I need to go survey the situation a bit more...
Thanks
Carl


-----Original Message-----
From: Randall [mailto:TR3driver at ca.rr.com] 
Sent: Thursday, October 22, 2015 8:37 AM
To: cfmtr3a at verizon.net; 'list Triumph' <triumphs at autox.team.net>
Subject: RE: [TR] TR3A Grab Handle Screws


> Does anyone know the size/type of the screw used to mount the grab 
> handle on
> TS81802 ?  The Parts Manual appears to have only the pre-60k 
> because there
> is no way to get a Simmonds fix nut (speed nut) behind it.  

On the post-60K body I parted out, there were slots in the sheet metal on
the bottom of the rail which gave just enough room to slide the fix nuts
into place.  (Had kind of a hard time getting them back out.)  So I believe
the YJ2526 screw shown in the later SPC is correct for post-60K.

But that was a long time ago, so I could be wrong.
Randall



--
I am using the free version of SPAMfighter.
SPAMfighter has removed 636 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

Do you have a slow PC? Try a Free scan
http://www.spamfighter.com/SLOW-PCfighter?cid=sigen


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20151022/94ff5b70/attachment.html>


More information about the Triumphs mailing list