[TR] Vibration at Speed

Andrew Uprichard auprichard at uprichard.net
Tue Nov 3 06:10:09 MST 2015


Ah - the old "when I get time".....

Let me know when you work out where to find it......  :-)

Andrew

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Randall
Sent: Monday, November 02, 2015 9:42 PM
To: 'Truiumphs'
Subject: Re: [TR] Vibration at Speed

>     Before I start pulling the driveline apart I thought I see If 
> anyone has had a similar problem of a suggestion of where to go next.  
> I'd appreciate the input.

The new rotors I picked up at VTR some years ago (OK, a lot of years ago)
turned out to be out of balance.  I tried drilling holes to balance them,
without much success; then finally bought another new pair.  The new ones
are still not perfect, but much better than the old ones.  I also found a
front hub that didn't run true and skimmed the face.  Still some small
vibration, but it's much better than it was.

When I find time, I plan to use an old on-car wheel balancer (so the hubs,
rotors & drums all get balanced with the tires & wheels) and see what that
does.

-- Randall  


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net



More information about the Triumphs mailing list