[TR] Vibration at Speed

[Randall]

>     Before I start pulling the driveline apart I thought I 
> see If anyone has had a similar problem of a suggestion of 
> where to go next.  I'd appreciate the input.

The new rotors I picked up at VTR some years ago (OK, a lot of years ago) turned out to be out of balance.  I tried drilling holes
to balance them, without much success; then finally bought another new pair.  The new ones are still not perfect, but much better
than the old ones.  I also found a front hub that didn't run true and skimmed the face.  Still some small vibration, but it's much
better than it was.

When I find time, I plan to use an old on-car wheel balancer (so the hubs, rotors & drums all get balanced with the tires & wheels)
and see what that does.

-- Randall