[TR] Clutch issue solved
David Porter
frogeye at porterscustom.com
Mon Nov 2 11:03:19 MST 2015
f'ing chinese threads...
On 11/2/2015 9:29 AM, Andrew Uprichard wrote:
>
> Thank you to all who replied. Today I created a power bleeder from my
> radiator pressure tester, applied 25 psi and went under the car to
> bleed the (new) slave. Immediately got air and when I tightened the
> bleeder screw the air went back up the tube into the cylinder.
>
> Turns out the bleeder on the new aftermarket slave was not sealing.
> Replaced it with a restored Girling and all is well.
>
> Andrew Uprichard
>
> P.S. An additional lesson I learned was to use a tube when bleeding
> the slave: the friend who was helping me over the weekend chose just
> to let the fluid drain on the floor and so never saw the air returning.
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com
--
Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM
87107 505-352-1378 Go HERE: my world www.porterbikes.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20151102/ed619f15/attachment.html>
More information about the Triumphs
mailing list