[TR] Any suggestions ?

[Andrew Uprichard]

TeriAnn:  I am thinking it has to be air, so I will try what you suggest.
Thanks!

Andrew

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of TeriAnn
J. Wakeman
Sent: Sunday, November 01, 2015 9:30 AM
To: triumphs at autox.team.net
Subject: Re: [TR] Any suggestions ?



On 11/1/15 5:05 AM, Andrew Uprichard wrote:
> On the first pus, the slave pushrod doesn't move enough to fully 
> disengage, but the second push is fine (rod moves probably a quarter-inch
more).
>
> Bled the line at the master cylinder, but that didn't help.  The 
> master had been rebuilt, so I replaced it with a new one:  the slave 
> was new from the get-go.
>
Did you try Tony's suggestion?  And you have a new flex line as well right?
One thing I learned to do is to blow through a new rubber flex line before
installing it.  Once I bought one that had a fitting crimp that was so tight
it completely closed off the inside of the hose.  So it is conceivable that
a crimp has almost closed off the hose.  And some systems seem to really
love retaining bubbles.  For those a pressure bleed is the only way to get
them all out.

TeriAnn

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net