[TR] problem with clutch

[Jeff Scarbrough]

On Mon, Jun 15, 2015 at 1:31 PM, Randall <TR3driver at ca.rr.com> wrote:
> Uh, Dave, your photo actually shows a Girling slave, mounted in the correct
> manner for a Girling slave.  The workshop manual photo is of a Lockheed
> slave, which was mounted differently.

I seem to recall a note included with my replacement slave cylinder
(from TRF) that said something to the effect that, even though it was
machined to have one face against the bracket, it should be put in
with the other face against the bracket.  Whether it was Girling or
Lockheed, I cannot recall...

Jeff Scarbrough
Corrosion Acres, Ga.