[TR] Fender bolts

Frank Fisher yellowtr3 at yahoo.com
Thu Jun 4 16:27:53 MDT 2015


they are bolts into captive nuts.an open end or box end is about all you can get in there. i don't think you'll get a socket on it. once you get a few turns they fender should slide off. all my fenders had slots for the bolts not round holes.is your bolt turning but not loosening? 
frank


      From: David Friedlander <forzion7 at gmail.com>
 To: TR3 Triumphs <triumphs at autox.team.net> 
 Sent: Thursday, June 4, 2015 3:08 PM
 Subject: [TR] Fender bolts
   
Hey all;

I'm trying to remove the rear driver's side fender from my 3A. How in the world does one 
remove those last three vertical (i.e., one above the other) bolts at the rear of the rear fender
(next to the tail light)? The fender is curved so one cannot even get a wrench on it, even 
with a flex socket. Did Triumph assemble these with British pygmies?? :- )  I have been 
trying, unsuccessfully, for several hours....

Thanks for any insights....

Dave Friedlander



** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150604/d2b9b32e/attachment.html>


More information about the Triumphs mailing list