[TR] TR2 with TR6 front suspension

[davehogye]

Switching to TR4A-TR6 suspension is a relatively simple process and is basically a bolt on upgrade. 

You can go half way by keeping the TR2-TR4 lower arms and uprights and just switch to the later TR4 3 degree trunnion to add caster and the asymmetrical upper A-arms and ball joint. TR4A through TR6 lower trunnions have a through bolt design compared to the earlier pin and castle nut arrangement, so the lower arms would need to be changed too. 

Dave H. 
----- Original Message -----

From: "Hoyt Duff" <hoytduff at gmail.com> 
To: "Triumph List" <triumphs at autox.team.net> 
Sent: Thursday, July 30, 2015 9:22:59 AM 
Subject: [TR] TR2 with TR6 front suspension 

On 7/28/15, Dan Cronin <adcronin at mi.rr.com> wrote: 
> Am putting the up-rated stub axle kit on my TR2 with TR6 front suspension / 


How does one update the front suspension in that manner? I have a very 
soild TR3 frame with a twisted RH turret. 

Since I must have that repaired, is it worthwhile to upgrade? 

-- 
Hoyt 

** triumphs at autox.team.net ** 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dlhogye@comcast.net 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150730/0dbcd1da/attachment.html>