[TR] Triumph - rigid fuel line diameters

[Geo Hahn]

I always carry a simple electric pump that can be used from the hard line
(5/16") and the feed to the carbs (1/4").  Wires are clearly marked with
alligator clamps and if power is taken from the coil (white wire) the pump
is controlled by the ignition switch.

I have used it many times though (so far at least) never on my own TR.

Geo

On Tue, Jul 14, 2015 at 3:11 PM, Lee Janssen <lee.k.janssen at gmail.com>
wrote:

> The club had an outing were a fuel pump went out and it would have been
> nice to have a small section of rigid fuel line, fuel hose and a couple of
> hose clamps.
>
> I'm pretty sure that the TR6 rigid fuel line is 5/16 inch OD but what is
> it for the other triumphs??
>
> Thanks in advance
> Lee Janssen
> Centennial CO
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150714/3eee5fe7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Electric Pump 1.JPG
Type: image/jpeg
Size: 31614 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150714/3eee5fe7/attachment.jpe>