[TR] TR6 ZS Carb/Timing Questions

Jonas Payne jpaynepbr at cox.net
Sat Jan 24 23:23:03 MST 2015

Sounds like you are a tooth or two off on your dist drive gear.  

Sent from my iPhone

On Jan 24, 2015, at 9:07 PM, Randall <TR3driver at ca.rr.com> wrote:

>>    I am trying to get my TR6 back on the road. I can't seem 
>> to get the timing set right. I had the distributor rebuilt at 
>> advanced distributor.
> Did Jeff give you special instructions on how to adjust the initial timing?
>> but the idle is 
>> really high with the idle adjustments backed all the way off.
> On the Stag, it turned out that the throttles were being held open by the float bowl vent valves.  I had to readjust the valve
> linkage quite a bit to get it to idle down with the vacuum retard disconnected (which I assume is what you are doing as well).
> -- Randall  
> ** triumphs at autox.team.net **
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/jpaynepbr@cox.net

More information about the Triumphs mailing list