[TR] TR250 Windshield Wiper Motor and switch

Roger Elliott elliottr at rmi.net
Fri Jan 23 16:58:23 MST 2015

Those rubber pieces are accessible behind the plates under the dash, 
right?  (After removing the glove box, etc.)


On 01/22/2015 10:10 PM, Tim Moore wrote:
> There is a rubber fitting under the sill on the wheel box just like 
> there is on top. These rubber parts deteriorate over time and can 
> crack. Im guessing that is what has happened to yours. Its a fairly 
> easy thing to replace.
> On Thursday, January 22, 2015 7:31 PM, Roger Elliott 
> <elliottr at rmi.net> wrote:
> .....
> But now, I have discovered a new problem - isn't that the way it always
> goes!
> The passenger wheel box assembly wobbles when the wiper is running. It
> wobbles less when the windshield is wet, but it still wobbles.
> I have tightened the nut as much as I dare - it helped, but it still
> wobbles.
> The first thing I did in this process was to pull the wiper rack cable
> out, cleaned and greased it and put it back in.  I did not do anything
> to the wheelboxes, thinking the grease on cable would take care of the
> wheel boxes.
> Do I need to get new wheelbox fittings?  Will that help?  Is there
> anything else that holds them in place?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150123/f8ed7d8e/attachment.html>

More information about the Triumphs mailing list