[TR] Painting Question

[James Henningsen]

The good news is I am finally back to working on my TR4 restoration project.
The replacement coolant pipe line that runs on the driver side of the engine
from the front housing to rear of engine is stainless steel.   Any
recommendations on how to paint the stainless pipe so it adheres well.  I am
told the finish should be black like the engine.  Powder coat?  

Thanks in advance.

Jim Henningsen

Ocala FL

62 TR4 

75 TR6

68 Land Rover

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150103/eadc893f/attachment.html>