[TR] TR3 Horn Wiring
Bud Rolofson
levilevi at comcast.net
Fri Aug 28 09:42:53 MDT 2015
Sand the horn button connections and inner hub, also check that the big nut behind the steering wheel (not you) is tight. My horns were " fixed" recently by doing this.
Bud
Sent from my Commodore 64
> On Aug 28, 2015, at 7:19 AM, Jeff Scarbrough <fishplate at gmail.com> wrote:
>
>> On Fri, Aug 28, 2015 at 8:40 AM, Keith Stewart <keithstewart at bell.net> wrote:
>> I have power at the N/G bullets and connectors. When the N/G wires are
>> attached to the horn connectors, I get power at the N/B wires. When the horn
>> button is pressed, all wired up this way, I very low “hmph” or “bump” is
>> heard. If I remove a N/B from a horn and touch it to ground, the horn sounds
>> as it should. If I remove the other N/B and touch it to ground, again the
>> horn sounds as it should. I am guessing the horn button ground is not doing
>> its job. Now, to trace where that ground connection is located. Does that
>> logic make sense?
>
> Yes. If you ground them directly and they sound normal, yet don't
> work properly when you ground them via the horn button, they I'd say
> you are on the right track. How about the ground strap around the
> flexible coupling on the steering shaft?
>
> Jeff Scarbrough
> Corrosion Acres, Ga.
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/levilevi@comcast.net
More information about the Triumphs
mailing list