[TR] Distributor Pedestal

Jim Vassiliadis jimstr4 at gmail.com
Tue Aug 4 17:30:01 MDT 2015

Problem solved.
The slot in the oil pump drive needs to be in the correct position to the
cog on the camshaft that drives the geared shaft.
We removed the shaft, put and turned the oil pump drive a few millimetres
and the shaft dropped in a couple of millimetres.
You have to turn the oil pump drive independantly of the motor.
We then lined up TDC and made sure the shaft, pump and dizzie were all in
I'm that little bit closer to getting the little guy back on the road.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150805/79cfd9af/attachment.html>

More information about the Triumphs mailing list